Toshiba DP4500 Service Handbook page 61

(b) Connection for developer bias adjustment
Front cover
opening/closing switch
(c) Connection for main charger adjustment
Front cover
opening/closing switch
Connect the jig detection connector
with the developer unit connector
(d) Connection for transfer/separation charger adjustment
Front cover
opening/closing switch
Connect the jig detection
connector with the developer
unit connector
DP4500/3500 ADJUSTMENT
(–) terminal
Connected to the machine frame
(+) terminal
(+) terminal
(Connect the red cable of the jig)
2 - 22
(+) terminal
(–) terminal
(Connect the white cable of the jig)
(–) terminal
(Connect the white cable of the jig)
December 2000 © TOSHIBA TEC
Grounded to the machine
frame (green cable)
Grounded to the machine
frame (green cable)