Programming; Figure 1.2 Interfaces Between The Sip Components - Samsung OfficeServ 7200 General Description Manual

CHAPTER 1. Introduction to the OfficeServ 7200
PRI
ISDN
Expansion
Chassis
T1/E1
PSTN
Chassis
AP (WBS24)
... . .
Mobile Station
(WIP-5000M)
3

Programming

MMC programs are used to change the data used for system settings and operate at
three levels: technician (or system) level, customer level, and station (subscriber)
level. Subscribers can only program MMCs accessible at station level. A password
is required for technician-level and customer-level programming but not for
subscriber programming.
Technician-Level Programming
All MMCs can be programmed at this level. Programming can be done using any of
the display phones in the OfficeServ system.
Customer-Level Programming
A customer can only program the MMCs specified in MMC 802 (Customer Access
MMC Number). Programming can be done using any of the display phones in system.
Subscriber-Level Programming
Programming can be done only for an individual subscriber's phone.
Refer to your Samsung OfficeServ 7200 Programming Guide for details.
Page 1-8
OfficeServ 7200
LCP 16DLI
TEPRI 8TRK
MCP WIM
Basic
4WLI
8HYB
8COMBO
WLAN
Laptop

Figure 1.2 Interfaces between the SIP Components

OfficeServ 7200 General Description Guide
16SLI
4DSL
WAN
LIM
MGI
LAN
OfficeServ Feature
- VoIP UMS
- Mail Server
- SIP Server
.....
SIP Phone
© Samsung Business Communications
Branch Office (OfficeServ 7200)