Figure 2.13 Front View Of The Wim; Table 2.14 Ports And Leds Of The Wim - Samsung OfficeServ 7200 General Description Manual

OfficeServ 7200 General Description Guide
Specifications
The specifications of the WIM data module are as follows:
One V.35 serial port
Two ports for connecting with the external Ethernet network
One 10Base-T/100Base-Tx Ethernet port for the DMZ
One 10Base-T/100Base-Tx Ethernet port for the station LAN
Front View
DMZ
WAN1
The components on the front panel of the WIM have the following functions:
Ports & LEDs
DMZ port
LAN port
SERIAL connector
WAN1, WAN2 port
SIO port
RST
RUN LED
DMZ LED
SERIAL LED
WAN1, WAN2 LED
© Samsung Business Communications
LAN
WAN2 SIO

Figure 2.13 Front View of the WIM

Table 2.14 Ports and LEDs of the WIM

Internal port (does not need firewalls)
Ethernet port connected with the Intranet
Port connecting the dedicated serial line that works with the V.35
WAN interface port that works with 10Base-T/100Base-Tx Ethernet
UART port (for tests)
Button for resetting the WIM module
This LED indicates the operational status of the WIM.
- Off : The WIM module is in an abnormal status or power is not being
supplied.
- On : The WIM module is operating correctly.
This LED indicates the operational status of the DMZ.
- Off : The link is not connected.
- On : The link is operating.
This LED indicates the operational status of the LAN.
- Off : The link is not connected.
- On : The link is operating.
This LED indicates the operation status of the WAN.
- Off : The link is not connected.
- On : The link is operating.
CHAPTER 2. OfficeServ 7200 Hardware
RUN DMZ LAN
SERIAL
WAN1 WAN2 SERIAL
Function
RST
WIM
Page 2-19