Voip Ums Interface; Sip Server Interface - Samsung OfficeServ 7200 General Description Manual

CHAPTER 4. OfficeServ 7200 Functions
1.2

VoIP UMS Interface

Auto Attendant/Mailbox Interface
The OfficeServ 7200 uses SIP and RTP, the VoIP protocols, to provide the auto at-
tendant and mailbox functions through the UMS and IP network operating in the
feature server. To interface with the VoIP UMS, the MGI module should be
mounted in the chassis slot of the OfficeServ 7200.
E-mail Notice
The system periodically checks whether any e-mails are received in the e-mail ac-
count registered to the UMS and notifies the result to the user by voice or through
the LCD screen or LED of the phone. To be notified by voice, the user should set
the TTS (Text-To-Speech) function.
1.3

SIP Server Interface

Standard SIP Phone Registration
The OfficeServ 7200 registers SIP phones which operate through the SIP interface
to provide call process services according to the system-numbering plan. The user
should install and operate the SIP server in the feature server.
Basic Call Processes of the Standard SIP Phone
The OfficeServ 7200 provides station and trunk line call services using the standard
SIP phones registered to the OfficeServ 7200. Standard SIP phones do not provide
all the functions of the keyphone system, only the basic station and trunk line call
services.
Additional Call Processes of the Standard SIP Phone
The OfficeServ 7200 provides additional services related to station and trunk line
call services using the standard SIP phones registered to the OfficeServ 7200. The
additional services provided by the system are as follows:
Call forwarding
UMS mailbox services
Group Ring (Parallel Forking): This function is available to the called party.
Page 4-2
OfficeServ 7200 General Description Guide
© Samsung Business Communications