Chapter 4: Operations And Settings; Setting Channel Levels - Elan A2 Installation Manual

A2
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Chapter 4: Operations & Settings

Setting Channel Levels

The A2 features independent Level Adjustment Potentiometers for each of its two channels. Use a small Phillips
screwdriver to independently adjust each channel of the amplifier for the specific speakers and environmental con-
ditions of the area it is powering. Turning the potentiometer clockwise increases the level, while turning it counter-
clockwise decreases the level. Factory default is 50%.
Set the levels by first lowering them all the way down, then raise the volume of any keypads or volume controls to
maximum. Slowly increase the level of the channel being adjusted by turning the potentiometer clockwise until the
channel begins to distort, then reduce the level slightly (turn counter-clockwise) until distortion is no longer present.
Follow this procedure for each channel.
1 2
LEVEL LEVEL
Factory
Default 50%
Figure 4-1: Level Adjustment Potentiometers
© ELAN Home Systems 2009 • All rights reserved. Page 19