Removal Of The Pcb - Daikin D-Series Service Manual

Outdoor Unit – E Series (68 / 71 / 75 Class), D Series
2.3 Removal of the
Procedure
Step
1. Removing the controller
PCB
Remove the screw of
1
the PCB, and release 2
tabs.
2 Release the tabs of the
terminal board, and
open the terminal
board.
3 Disconnect each
connector on the back
of the terminal board.
Disconnect the service
4
monitor PCB connector.
308
PCB
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Si12-619A
Points
Release the tab to remove
the service monitor PCB.
Removal Procedure