Service Check Function - Daikin D-Series Service Manual

Super multi nx d/e series

Hide thumbs Also See for D-Series:

Table of Contents

Service Check Function

indicate corresponding codes.

Check Method 1

1. When the timer cancel button is held down for 5 seconds, a "00" indication flashes on the

2. Press the timer cancel button repeatedly until a continuous beep is produced.

1. A short beep and two consecutive beeps indicate non-corresponding codes.

2. To cancel the code display, hold the timer cancel button down for 5 seconds. The code

Service Diagnosis

series remote controller, the temperature display sections on the main unit

temperature display section.

The code indication changes in the sequence shown below, and notifies with a long beep.

display also cancels itself if the button is not pressed for 1 minute.

TIMER CANCEL button

It cancels the timer setting.

ARC433B46, A47

Show Quick Links

Table of Contents