Service Work (As Additional Order) - KTM 250 EXC-F EU Owner's Manual

SERVICE SCHEDULE

Service work (as additional order)

8.2
Change the front brake fluid.
Change the rear brake fluid.
Change the foot brake cylinder seals.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Clean the spark arrestor.
x
Perform a fork service.
x
Service the shock absorber.
Change the spark plug and spark plug connector.
Change the piston. x
Check/measure the cylinder.
Check the cylinder head.
x
Check the valves, valve springs, and valve spring seats.
Check the camshaft and cam lever.
Change the connecting rod, conrod bearing and crank pin.
Check the transmission and shift mechanism.
Check the oil pressure regulator valve.
Check the oil pumps and lubrication system.
Check the timing assembly.
Change all engine bearings.
S15N: Once after 15 operating hours
S45A: Every 45 operating hours
S105A: Every 105 operating hours/every 50 operating hours when used for motorsports
J1A: Annually
x
x
(XCF‑W, EXC‑F EU, EXC‑F AUS)
x
( p. 63)
x
( p. 50)
x
(XCF‑W)
x
x
x
x
x
x
x
x
x
x
x
S15N S45A S105A
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
34
J1A
•
•
•
•
•
•