KTM 250 EXC-F EU Owner's Manual page 62
Hide thumbs
Also See for 250 EXC-F EU:
- Owenrs manual (125 pages) ,
- Owner's manual (117 pages) ,
- Setup instructions (14 pages)
Table of Contents
Advertisement
SERVICE WORK ON THE CHASSIS
–
Check the chain sliding guard for wear.
»
If the bottom edge of the chain bolt is in line with or below the chain sliding
guard:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
»
If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Screw, chain sliding
guard
401343-01
–
Check the chain sliding piece for wear.
»
If the bottom edge of the chain bolt is in line with or below the chain sliding
piece:
–
Change the chain sliding piece.
–
Check that the chain sliding piece is firmly seated.
»
If the chain sliding piece is loose:
–
Tighten the chain sliding piece.
Guideline
Screw, chain sliding piece
401344-01
–
Check the chain guide for wear.
Info
Wear is visible on the front of the chain guide.
»
If the light part of the chain guide is worn:
–
Change the chain guide.
400985-01
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the chain guide.
Guideline
Remaining screws, chassis
Remaining nuts, chassis
101361-01
–
Remove the motorcycle from the lift stand. (
x
M6
6 Nm
(4.4 lbf ft)
x
M8
x
M6
M6
p. 42)
60
Loctite
®
243™
15 Nm
(11.1 lbf ft)
10 Nm
(7.4 lbf ft)
10 Nm
(7.4 lbf ft)
Advertisement
Table of Contents
