Checking Basic Setting Of Fork; Adjusting The Compression Damping Of The Fork; Adjusting The Rebound Damping Of The Fork - KTM 250 EXC-F EU Owner's Manual

TUNING THE CHASSIS

Checking basic setting of fork

9.11
Info
For various reasons, no exact riding sag can be determined for the forks.

Adjusting the compression damping of the fork

9.12
Info
The hydraulic compression damping determines the fork suspension behavior.

Adjusting the rebound damping of the fork

9.13
Info
The hydraulic rebound damping determines the fork suspension behavior.
–
As with the shock absorber, smaller differences in the rider's weight can be com-
pensated by the spring preload.
–
However, if the fork is often overloaded (hard end stop on compression), harder
springs must be fit to avoid damage to the fork and frame.
401000-01
–
Remove protection caps
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
100020-10
Compression damping
Comfort
Standard
Sport
Full payload
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection covers
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
101316-10
Comfort
Standard
Sport
Full payload
.

clockwise all the way.

are located at the bottom end of the fork legs.

24 clicks
22 clicks
20 clicks
20 clicks
.

clockwise all the way.

are located at the top end of the fork legs.

22 clicks
20 clicks
18 clicks
18 clicks
39