Table of Contents
Advertisement
Display shows
setting
Display shows
setting
Display shows "d"
No.
Display shows a
description of the
"d" function
Display indicates
whether the
function is active
Activates each
function briefly
To enter test mode, press hot-air key and combi-steam key for 2 sec.
To exit test mode, turn switch left. Change between set-up mode and test mode by
pressing steaming/preheating key.
How to operate the selected component: You turn the component on (1) and off (2) by
pressing the step key. Or, you press the alarm key, and the component is active for as
long as you press the key.
The set-up mode is only intended for service engineers who wish to test the various
modes/functions.
Test Mode
Main switch
Not active
- 18 -
For test mode, press
HOT AIR and COMBI
STEAMING for 2 sec.
For test mode, press
COMBI STEAMING and
HOT AIR for 2 sec.
Possible to change to
"U" setting by pressing
STEAMING/PRE-
HEATING
Not active
Not active
Possible to choose a
"d" function with turn
switch
Advertisement
Table of Contents
