Table of Contents
Advertisement
B1 Save presettings
In this function, you save the preset time and temperature.
If, for instance, the end user uses HOT AIR at 180°C for 30 minutes, the standard setting can
be changed as follows:
1. Change time and temperature.
2. Enter user menu (keep pressing alarm key for 5 sec.)
3. Select B1 (save presettings).
4. Press alarm key to accept.
You can only save the settings when the control lamp next to the alarm key flashes.
B2 Timer start
(Please see user manual)
B3 Sound level low
In this function, you adjust the sound that is heard when a key is activated. The sound level
can be adjusted from 0 to 9 (0 is no sound at all).
You adjust the sound level by pressing the step key.
B4 Sound level high
In this function, you adjust the sound that comes from the alarm. The sound level can be
adjusted from 1 to 9 (1 is very low).
You adjust the sound by pressing the step key.
B5 Sound frequency
In this function, you adjust the sound frequency.
The sound frequency can be adjusted from 1 to 9.
You adjust the sound by pressing the step key.
You test the sound by pressing the alarm key.
B6 Interior light
In this function, you adjust the interior light.
The light can be set at 0 or 5.
0= Light is always on.
5= Light goes out when the oven has been idle for 5 minutes.
You adjust the interior light by pressing the step key.
B7 Current temperature
In this function, you choose whether the oven should display the current temperature or the
preset temperature.
You choose between 0 and 1
0= The preset temperature is shown.
1= The current temperature is shown.
You change the setting with the step key.
User Menu B1-B7
- 25 -
Advertisement
Table of Contents
