Do you have a question about the X2-20ES and is the answer not in the manual?
Questions and answers
Helen Stewart-Crawford
March 29, 2025
turntable only works intermittently Tried switching off at wall and leaving 10 minutes. No change
2 comments:
Mr. Anderson
March 29, 2025
The Whirlpool X2-20ES turntable may work intermittently due to several possible reasons:
1. Loose or damaged wiring: Connections between the motor, control board, or power supply may be loose or worn, causing the turntable to stop and start.
2. Faulty turntable motor: The motor that drives the turntable might be failing or have worn-out components, resulting in inconsistent operation.
3. Defective door switch: If the microwave’s door switch is faulty or misaligned, it may intermittently stop power to the turntable motor.
4. Control board issues: A malfunctioning control board might not consistently send power to the turntable motor.
5. Obstructed or worn turntable components: Physical obstructions, a misaligned turntable ring, or worn-out roller guides can prevent the turntable from rotating smoothly.
Each of these issues can cause the turntable to operate irregularly. Testing components with a multimeter and checking for physical wear or damage can help identify the specific cause.
This answer is automatically generated
Helen Stewart-Crawford
March 30, 2025
@Mr. Anderson
Katrina
April 16, 2025
Hello I just want to know the wattage of this model?
Need help?
Do you have a question about the X2-20ES and is the answer not in the manual?
Questions and answers
turntable only works intermittently Tried switching off at wall and leaving 10 minutes. No change
The Whirlpool X2-20ES turntable may work intermittently due to several possible reasons:
1. Loose or damaged wiring: Connections between the motor, control board, or power supply may be loose or worn, causing the turntable to stop and start.
2. Faulty turntable motor: The motor that drives the turntable might be failing or have worn-out components, resulting in inconsistent operation.
3. Defective door switch: If the microwave’s door switch is faulty or misaligned, it may intermittently stop power to the turntable motor.
4. Control board issues: A malfunctioning control board might not consistently send power to the turntable motor.
5. Obstructed or worn turntable components: Physical obstructions, a misaligned turntable ring, or worn-out roller guides can prevent the turntable from rotating smoothly.
Each of these issues can cause the turntable to operate irregularly. Testing components with a multimeter and checking for physical wear or damage can help identify the specific cause.
This answer is automatically generated
@Mr. Anderson
Hello I just want to know the wattage of this model?