Table of Contents
Advertisement
Installing the oven
To ensure that the oven functions correctly when installed, it should be placed upright and
level (horizontally). This is measured at the front and side edge of the roof, and adjustment is
made by means of the adjusting screws on the stand or on the legs of table models. The
height of the oven can also be adjusted to fit the trolley for rack.
The oven should be placed 5 cm / 2 inch from the rear wall and the distance
between the right side of the oven and the nearest wall or piece of furniture, etc.
should be at least 7 cm / 2.75 inch. This is to ensure the necessary flow of cooling air
to the oven. Strong sources of heat such as hotplates, tilting frying pans, deep fat
fryers, etc. should not be placed near the oven, otherwise the warranty may cease to
apply.
(NSF) On an oven with stand, the distance to the floor must be at least 150
mm / 5.9 inch. Only 2½ threads must be visible on the adjustable feet.
(NSF) On table models, the legs must be adjusted to allow a minimum
clearance of 76 mm / 3 inch to the surface on which the oven stands.
Installation and Connection
Correct
Wrong
- 6 -
Advertisement
Table of Contents
