Switching Between Phone Calls On Multiple Trunks; Mulap Conference Release - Siemens HiPath 500 Operating Instructions Manual

Team and Executive/Secretary Functions With Trunk Keys
Step by Step
104
Retrieving the call:
Press the slowly flashing trunk key.
Switching Between Phone Calls on Multiple
Trunks
Precondition: You are conducting a call over a trunk in
your group. Another trunk key starts flashing.
Press the flashing trunk key. The first party is placed on
hold on the other trunk.
Press the slowly flashing trunk key. The second party is
placed on hold.
You can switch between the two call as many times as
you wish. Always press the slowly flashing trunk key.

MULAP Conference Release

If this function has been released (ask your service per-
sonnel), you can program the "Privacy Release" key for
your telephone Page 62.
If you press the programmed "Privacy Release" key dur-
ing a call (key lights up), every user who programmed
your MULAP line as a key (key flashes) can join the call
by pressing this key.
You do not have to press "Enquiry" or "Conference" to
transfer/accept the call. Your team partner only has to
press the flashing line key to join the conference.