Ending A Conference (Initiator Only) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Next?
>
Exit list?
>
View conf parties?
Next?
>
Remove party?
>
US: Leave conference?
>
UK: Withdraw?
>
End conference?
Program/Service
>
Drop last conf. party?
Program/Service
qhme
If an optiPoint application module is connected
to your telephone, the "Terminal Mode" is activa-
ted once the function is started
The prompts are now shown on the optiPoint ap-
plication module display.
You can use the keys on the optiPoint application
module.
:
To display other stations, confirm each subsequent dis-
play.
:
To exit the list: Select and confirm.
Removing Parties From the Conference
(Initiator Only)
:
Select and confirm.
The first station appears on the screen.
:
Confirm as often as required until the desired station
appears.
:
Select and confirm.
Leaving a Conference
:
Select and confirm.
:
or
t
Replace the handset, if this feature is configured (con-
tact your service personnel).

Ending a Conference (Initiator Only)

:
Select and confirm.
or
rg
Press the key. The LED lights up. Enter the code. The
LED goes out.
or
t
Replace the handset, if this feature is configured (con-
tact your service personnel).
Removing the ISDN Central Office Party
From the Conference (Only for U.S., Not for HiPath 500)
:
Select and confirm.
or
Press the key. The LED lights up. Enter the code. The
LED goes out.
Making Calls – Convenience Functions
Page 117.
55