Using A Caller List - Siemens HiPath 500 Operating Instructions Manual

Making Calls – Convenience Functions
Step by Step
>
Caller list?
Next?
>
US: Exit?
>
UK: End?
Program/Service
Speaker
38

Using a Caller List

If you are unable to accept an external or internal call,
the call attempt is stored in the caller list.
You can store answered calls either manually (both in-
ternal and external calls) or automatically (external calls
only; contact your service personnel for details).
Your telephone stores up to ten calls in chronological or-
der. Each call is assigned a time stamp. The most recent
entry not yet answered in the list is displayed first. Mul-
tiple calls from the same caller do not automatically
generate new entries in the caller list. Instead, only the
most recent time stamp for this caller is updated and its
number incremented.
Retrieving the Caller List
Precondition: Service personnel has set up a caller list
for your telephone.
:
Select and confirm
or
rlf
Enter the code.
The last call is displayed on the screen.
:
To view other calls, confirm each subsequent display.
Ending Retrieval
:
Select and confirm.
:
or
Press the key. The LED goes out.
or
Press the key. The LED goes out.
[1] "Different Displays in a HiPath 4000 Environment
(Not for HiPath 500)"
1
.
If an optiPoint application module is connected
to your telephone, the "Terminal Mode" is activa-
ted once the function is started
The prompts are now shown on the optiPoint ap-
plication module display.
You can use the keys on the optiPoint application
module.
Page 120
Page 117.