Trunk Flash (Not For Hipath 500) - Siemens HiPath 500 Operating Instructions Manual

Making Calls – Convenience Functions
Step by Step

Trunk Flash (Not for HiPath 500)

To activate ISDN-type services and features through the
network carrier's analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Precondition: You have set up an external connection.
Press the key. The LED lights up.
Program/Service
> :
1
Select and confirm .
* 51=Trunk flash?
or
qie
Enter the code.
o
Enter the service code and/or telephone number.
[1] "Different Displays in a HiPath 4000 Environment
(Not for HiPath 500)" Page 120
59