Using The Speakerphone - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Mute off?
Mute
>
HF answerback on?
>
HF answerback off?
qmj
or

Using the Speakerphone

A colleague addresses you directly over the speaker
with a speaker call. You hear a tone before the an-
nouncement. The other party's name or station number
appears on the screen.
You can conduct the call with the handset or in speaker-
phone mode.
n
Lift the handset and answer the call.
or
:
Press the "OK" key to confirm your selection and answer
the call.
or
Press the key and answer the call.
Enabling and Disabling Handsfree Answerback
:
Select and confirm.
or
:
or
rmj
Enter the code for "on" or "off".
Making Calls – Convenience Functions
Speakerphone mode is not available with
optiPoint 500 economy and optiPoint 500 basic.
If handsfree answerback is enabled (see below),
you do not need to switch on the microphone -
you can answer directly. You can answer immedi-
ately in speakerphone mode.
If handsfree answerback is disabled (default set-
ting), follow the procedure described above.
Placing a speaker call to a colleague Page 46.
33