Dialing From The Telephone Database (Ldap) (Not For Hipath 500) - Siemens HiPath 500 Operating Instructions Manual

Making Calls – Convenience Functions
Step by Step
Speaker
US: Directory?
UK: Phonebook?
>
2=LDAP?
>
Delete Character?
44
Dialing from the Telephone Database (LDAP)
(Not for HiPath 500)
If configured (ask your service personnel), you can
search for directory data in the LDAP database and dial
the number of any subscriber you find there.
Precondition: The LDAP search feature has been con-
figured in the system.
n
Lift the handset.
or
Press the key. The LED lights up.
:
Confirm.
:
or
qih
Enter the code.
If applicable If several directories have been configured:
:
Select and confirm.
o
Enter the name you wish to search for using the keypad
(max. 16 characters).
You can enter an incomplete name, e.g. "mei" for "Mei-
er".
You can use the keypad with the digits as an alphanu-
meric keypad in this case and enter the names by
pressing the appropriate keys one or more times as
needed.
For example, you can enter the letter "r" by pressing the
"7" three times or the letter "e" by pressing the "3" twice.
If applicable If configured (ask your service personnel), you can also
search for surname and first name.
To separate surname and first name by a space, enter
"0". You can enter incomplete names, e.g. "mei p" for
"Meier Peter".
If applicable
:
Select and confirm. The letter entered last is deleted.
In large databases, the results of the search may
be incomplete if too few characters are entered
Page 45.