Clutch Lever; Multi--Function Display (Mfd) Set Button; Right Side Handlebar Controls; Engine Stop/Run Switch - Victory Motorcycles V92C Owner's Manual

Instruments and Controls

Clutch Lever

To disengage the clutch, pull the clutch lever toward the handlebar. To engage the clutch, gradually release the
clutch lever. For smooth clutch operation, pull the lever quickly and release it gradually.
The motorcycle is equipped with a clutch interlock switch that prevents the engine from starting
Notice
when the transmission is in gear and the clutch is engaged (see page 62).
Multi- -Function Display (MFD) Set Button
Use the MFD Set button in conjunction with the MFD Mode
button to control the features of the multi- -function display
(see page 34).

Right Side Handlebar Controls

Engine Stop/Run Switch

The engine stop/run switch completes or interrupts the
ignition, starter, and fuel pump circuits. To complete the
circuits, allowing the engine to start and run, press the
lower portion of the engine stop/run switch (Run
position). To interrupt the circuits, press the upper portion of
the switch (Stop position). The engine should not start or run
when the switch is in the Stop position.
Use the engine stop/run switch to turn the engine off under
normal or emergency conditions.
40
2
5
1. Engine Stop/Run Switch
2. Emergency Flasher Switch
3. Starter Button
4. Throttle Control Grip
5. Multi--Function Display Mode Button
1
4
3