Lace Insertion - Bernina activa 125 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
• Pin or baste the lace in position.
First Run:
• Select stitch #1 - SL 1.5mm-2mm with the needle position set at half left.
• Place the edge of the lace to the left edge of the guide on the foot and sew.
• Sew the right side in a like manner using the needle position set at half right.
• From the back, carefully cut through the fabric, in the middle of the two rows of stitching.
• Press the fabric back against the straight stitch.
Second Run:
• Select stitch #2 - SW 1.5mm-2mm and SL 0.75mm-1mm with the needle position set at half left.
• Place edge of lace first to the left of the blade, with the needle in the half left position, and sew the
zigzag stitch over the edge of the lace and the previously sewn straight stitch.
• Sew the right side in a like manner using the needle position set at half right.
• Trim surplus fabric from the wrong side.
BERNINA
M Y
ASTERING OUR
BERNINA

LACE INSERTION

Fabric: Lightweight cotton 4" x 6"
9" insertion lace, ½ "- ¾" wide
Needle: 75/11 Universal
Thread: 60 wt. cotton
Presser Feet: Edgestitch Foot #10 (optional accessory)
1/10/02
®
®
activa 125/135 PE/145
activa 125/135 PE/145/75