8. Using a 5/64-in. Allen-wrench, remove the set screw
from the bearing cap.
9. Using a magnet, remove the bleed ball.
10. Using Spanner Wrench, loosen the bearing cap.
166
11. Remove the shock rod/piston assembly from the
shock body.
FS147
12. Drain the oil from the shock body into a suitable con-
tainer.
13. Using an appropriate piston removal tool, remove
the floating piston.
PC244
NOTE: For ease in removing the piston, use the
inflation needle to help vent the shock body.
PC245
14. Clean and inspect all components.
ASSEMBLING/CHARGING
1. Lubricate the O-ring and wiper on the floating piston
with shock oil.
PC246
FS151
FS152
FS153