12. Grasp the EVOL chamber end (bottom) of the
shock; then gently pull the piston/shaft/bearing/
EVOL free from the shock body. Set this entire
assembly aside.
13. Remove the air sleeve from the reservoir end of
the shock.
172
14. Using a scribe or pick tool, remove the "samurai"
and back-up seals from the air sleeve.
Care must be taken not to score or damage any of the
aluminum sealing surfaces.
L
M
15. Pour the shock oil out of the shock body; then
clamp the "piggy-back" body assembly in the vise.
N
CAUTION
O
P
Q