Installing An Ap 7161; Required Tools; Mounting Bracket Options - Motorola AP 7161 Installation Manual

20

Installing an AP 7161

The following procedures detail the installation procedure for deploying an AP 7161 access point:

Required Tools

The following is a list of the minimal tool set required to install an AP 7161:
• 8 mm socket and driver (for ground screw)
• #2 phillips screwdriver (for external hardware reset cover screw)
• Torque wrench or ratchet with 10mm, 1/2 inch and 3/4 inch sockets (for U-bolt, 1/2 inch and 3/4 inch bolts and nuts)
• Adjustable wrench (alternative for U-bolt, 1/2 inch and 3/4 inch bolts and nuts)

Mounting Bracket Options

The AP 7161 mounting hardware kit (P/N KT-147407-01) and extension arm (P/N KT-150173-01) support several options for
installation.
The AP 7161 mounting hardware kit includes the access point, angle adapter, and pole mount bracket sections.
The access point section and the angle adapter section can be adjusted to rotate (plus or minus 15 degrees) and tilt (up to 45
degrees) during installation to orient the unit for optimal vertical positioning.
Ancillary hardware to assemble the mounting hardware sections is included in the mounting kit.
Description
M6 serrated hex flanged screws
1/2 inch hex head nut
1/2 inch x 3/4 inch hex head bolt
Quantity
8
2
2
AP 7161 Access Point Installation Guide