Ap 7161 Hardware Installation; Ap 7161 Ports And Connections; Ap 7161 Antenna Connectors - Motorola AP 7161 Installation Manual

AP 7161 Access Point Installation Guide 13

AP 7161 Hardware Installation

The AP 7161 access point has the following port designations:
• GE1/POE - LAN Port
• GE2 - WAN Port
• Console Port
An AP 7161 must be installed by trained professionals familiar with RF planning and regulatory limits defined by the regulatory
bodies of the country where the devices are being deployed. All common precautions for grounding and ESD (Electrostatic
Discharge) protection should be observed during deployment and installation. AP 7161 devices must be installed such that no
harmful interference results from device operation.

AP 7161 Ports and Connections

The following sections describe the ports and connections for the AP 7161.

AP 7161 Antenna Connectors

The AP 7161 is configured with eight N type male connectors to support two or three active radios.
Mount the 2.4 GHz antennas on the connectors marked R1-A, R1-B and R1-C.
Mount the 5 GHz antennas on the connectors marked R2-A, R2-B and R2-C.