Dual Radio Leds - Motorola AP 7161 Installation Manual

AP 7161 Access Point Installation Guide

Dual Radio LEDs

A dual radio model access point (P/N AP-7161-66040-US and AP-7161-66040-WR) has the following unique LED behavior:
LED 1
(Sensor) (2.4 GHz)
Not Used Blinking Emerald
indicates
802.11b/g/n
activity.
Solid Emerald
indicates a radio
is present but not
configured.
CAUTION
LED 2 LED 3
(5 GHz)
Blinking Amber
indicates
802.11a/n activity.
Solid Amber
indicates a radio
is present but not
configured.
If LED 6 remains blinking Red for longer than 10 minutes, cycle the power to
the unit. If the condition persists, contact the Motorola Solutions support center.
LED 4 LED 5
(GE2/WAN) (GE1/LAN)
LED Off LED Off
indicates the port indicates the port
is not connected. is not connected.
Blinking Green Blinking Green
indicates normal indicates normal
operation. operation.
Rapidly blinking Rapidly blinking
Yellow indicates Yellow indicates
a port error. a port error.
LED 6
(System)
Solid Red
indicates
diagnostic mode.
Randomly blinking
Red indicates
booting.
Blinking Red and
White at 1 second
interval indicates
"no adoption".
Solid White
indicates normal
operation.
Blinking Red at 1
second interval
indicates POST
failure.
19