Ap 7161 Console, Ge1/Poe And Ge2 Ports - Motorola AP 7161 Installation Manual

AP 7161 Access Point Installation Guide 15

AP 7161 Console, GE1/POE and GE2 Ports

The AP 7161 has Ethernet ports for external Console, GE1/POE, and GE2 connections.To gain access to the ports you will
need to remove the protective caps.
The Ethernet cable from the PoE device (if used) connects to the GE1/POE port on the unit.
The GE2 port on the unit can be used if a second data connection for an external device (e.g. surveillance camera) is required.
Ensure the GE2 WAN port has been configured to permit an attached external device during the configuration process.
When making connections using these ports, a properly rated RJ45 connector is required. One weatherproof RJ45 plug kit is
provided with each access point. When connecting cables to the AP 7161 Ethernet ports, follow the instructions in the connector
packaging and tighten the connectors to create a weatherproof seal. Shielded cables are required.