Radio Frequency Interference Requirements - Canada; Radio Transmitters; Ce Marking And European Economic Area (Eea); Statement Of Compliance - Motorola AP 7161 Installation Manual

Hide thumbs Also See for AP 7161:

Table of Contents

AP 7161 Access Point Installation Guide

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Devices using the 5.470 – 5.725 GHz band shall not be capable of transmitting in the 5.60-5.65 GHz band in Canada, make sure

that Canada is the country selected during setup to ensure compliance.

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference and (2) this device must accept any interference received, including interference that

may cause undesired operation.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (EIRP) is not more than that permitted for successful communication.

This device has been designed to operate with the antennas listed in this guide, and having a maximum gain of 8 dBi (2.4 GHz)

and 10 dBi (5 GHz) for radios one and two. Antennas not included in this list, or having a gain greater than 8 dBi (2.4 GHz) and

10 dBi (5 GHz) for radios one and two, are prohibited for use with this device. This device has been designed to operate with the

antennas listed in this guide, and having a maximum gain of 4.5 dBi (2.4 GHz) and 7.5 dBi (5 GHz) for radio three. Antennas not

included in this list, or having a gain greater than 4.5 dBi (2.4 GHz) and 7.5 dBi (5 GHz) for radio three, are strictly prohibited for

use with this device. The required antenna impedance is 50 ohms.

Label Marking: The Term "IC:" before the radio certification signifies that Industry Canada technical specifications were met.

This device has been designed to operate with the antennas listed in the Enterprise Wireless LAN Antenna Specification Guide.

Refer to the guide at http://support.symbol.com/support/product/manuals.do.

The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:

• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz

• France outside usage, the equipment is restricted to 2.400-2.45 GHz frequency range.

• Italy requires a user license for outside usage

Motorola Solutions hereby declares that this device is in compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www.motorola.com/doc.

Table of Contents

Show Quick Links

Table of Contents