Removal Of Log Set - HearthStone Champlain 8301 Owner's Manual

Hearthstone Quality Home Heating Products, Inc
7. Gently slide the split log (5) onto pins C and D
as shown below.
8. Place the right end of the curved log (6) onto the
protruding pin C on log 1, and rest its left end on
log 2 as shown below. Push this log back until
the curve is against the baffle.
9. Spread the Charcoal Embers evenly across the
front portion of the Pan Burner, one layer high.
You may or may not need to use all of the
Charcoal Embers. Keep the rest for use in the
future. Do not drop the embers into the burner
holes. Locate and open the bag of Platinum
Bright Embers. Pull apart small pieces of the
wool and sprinkle over the Charcoal Embers
randomly. This wool will glow brightly once the
unit is running.
10. Replace the glass frame by sliding it down the
face of the firebox and pushing the top back.
Slide the two clips back down to hold the frame
in place.
R L
EMOVAL OF OG
CAUTION! LOG SET AND CHARCOAL EMBERS
WILL RETAIN HEAT AND CAN BE VERY HOT, IF
PREVIOUSLY LIT! ALLOW AT LEAST 1 HOUR
AFTER PILOT LIGHT IS TURNED OFF BEFORE
HANDLING.
To remove the log set, follow the Installation of Log
Set instructions in the reverse order.
CAUTION! FRAGILE! HANDLE LOG SET AND
CHARCOAL EMBERS WITH CARE.
CHAMPLAIN DV Model 8301
S
ET
Page 19 of 30