Permobil M300 Service Manual page 9

Covers
Removing the upper chassis cover
The cover is fitted with four knobs (see fig.).
1. Move/fold the leg rests out and, if necessary,
raise the seat.
2. Switch off the main power switch on the control
panel.
3. If fitted, remove the front cover. See page 8.
4. Remove the two remaining knobs holding the
cover. (see fig.).
5. Remove the cover
backwards.
Fitting the upper chassis cover
1. Move/fold the leg rests out and, if necessary,
raise the seat.
2. Switch off the main power switch on the control
panel.
3. Fit the rear chassis cover before the two rear
knobs on the upper chassis cover is fitted (see fig.).
4. Fit the front chassis cover before the two front
knobs on the upper chassis cover is fitted
(see fig.).
by pulling/lifting it
Chassis covers.
9
The upprer cover is fitted with four knobs.
Covers