Permobil M300 Service Manual page 39

Seats
Assembly of Corpus 3G
Assemble in the reverse order.
1. Mount the seat using the four screws. See
the fig. It can be mounted in three different
positions, depending. For more information,
see the seats service manual.
2. Fit the control panel. See page 42-43.
Re-attach the cabling to its fixing points.
3. Mount the seat plates by first mounting them
with the quick-mount clamps at the front and
then the screws at the back. Fit the quick-
mount clamps by pushing them straight into
the holes.
4. Fit the cushion in desired position by pressing
it against the seat plates.
5. Lower the seat to desired position. If the electric
seat lift does not work normally because the
batteries are discharged or the adjustment
device is defective, the seat can be raised/
lowered manually. See page 31.
For this task the following tools are necessary:
1 Allen key 5 mm.
1 Allen key 6 mm.
The seat is held in place by four screws.
The seat plates on Corpus 3G are held in place
by two screws at the back edge and two quick-
mount clamps at the front.
39
Seats