Permobil M300 Service Manual page 17

Batteries
8. On Permobil M300, the batteries are secured with battery locks. Remove these by pushing them
downwards/towards the center of the chassis (see fig.).
9. Disconnect the battery connections (see fig.). See also the sticker on the inside of the rear
chassis cover.
10. Lift/pull the battery out of the chassis using the battery belt.
m WARNING!
Observe care in the use of metallic objects when working with batteries. A short-circuit can easily cause an explosion. Always use
protective gloves and protective eye-glasses.
The batteries are heavy and must be handled with care.
Used or broken drive batteries should be taken care of in an environmentally correct manner in accordance with locally applicable
recycling directions.
10. Lift a new battery into the chassis using the battery belt. Leave the battery belt on the battery.
Position the battery with the battery terminals at the rear.
11. Refit the battery connections to the new battery. See also the sticker on the inside of the rear
chassis cover.
12. On Permobil M300, refit the battery locks by pushing them downwards and at the same time into the
intended recess in the chassis (see fig. above).
13. If the wheelchair is equipped with seat support, refit it. See page 36.
14. Refit the chassis covers. See page 8-9.
Battery connections and battery locks of the rear battery.
17
Batteries