Table of Contents
Advertisement
5 . 4 . 5 . U
, C
P P E R
A
S S E M B L I E S
Refer to items 3 (center sprocket assembly) and 4 (upper sprocket assembly) in
page 2-2 and item 2 (lower sprocket assembly) in
1. Remove inner timing belt (see
2. Beginning with the lower sprocket assembly, remove each constant speed sprocket
assembly:
a) Remove screw mounting turn-down knob to shaft of lower constant-speed sprocket
assembly (lower sprocket assembly only).
b) Remove turn-down knob (lower sprocket assembly only).
c) Remove three Allen head screws from operating side of mainframe.
d) Carefully slide sprocket assembly out of non-operating side of mainframe.
CHRISTIE INCORPORATED P35GPS Projector
June, 1998
Figure 5-4: Shutter Timing Belt
,
L
E N T E R
A N D
O W E R
Section
C
- S
O N S T A N T
P E E D
Figure 2-3
on page 2-3.
5.4.3).
5 : M a i n t e n a n c e
1: Shutter Timing Belt
2: 12-Groove Pulley
3: Shutter Driver
Housing
4: Single Blade Shutter
Assembly
5: Jackshaft Housing
6: 16-Groove Pulley
S
P R O C K E T
Figure 2-2
on
5-5
Advertisement
Table of Contents
