Christie P35GPSZ-MT Operating Instructions Manual page 16

P 3 5 G P S D u a l L e n s T u r r e t P r o j e c t o r
2. Insert lock washer (item 2 in
second hex bolt (item 1 in
washer, into upper left opening of projector mount. Rotate hex head bolt four full turns.
3. Lift and mount projector to console or pedestal. Thread two remaining hex head bolts
with lock washer and flat washer. Insert into two bottom mounting holes on projector.
4. Level projector on lamphouse or pedestal.
5. Tighten nut on mounting stud using 9/16" wrench.
6. Tighten three hex head screws using same wrench.
CHRISTIE INCORPORATED P35GPS Projector
June, 1998
Figure 3-1) and flat washer (item 3 in
Figure 3-1). Insert hex head bolt, with lock washer and flat
Figure 3-1: Installing the Projector
Figure 3-1) onto
3-2