1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. P35GPSZ-MT
  6. Operating instructions manual

Christie P35GPSZ-MT Operating Instructions Manual

35mm film projector
Hide thumbs Also See for P35GPSZ-MT:
Table of Contents

Advertisement

Quick Links

Download this manual
CHRISTIE
I N C O R P O R A T E D

Operating Instructions

Manual Turret Model P35GPS(Z)-MT
Automatic Turret Model P35GPS(Z)-AT
Automatic Turret Model M35GPS(Z)-AT
115VAC, 60Hz Motor or 220VAC, 50Hz Motor
For
35mm Film Projector
TD-621: Version 3.5
C C C C
I I I I
HRISTIE
HRISTIE
NCORPORATED
NCORPORATED
HRISTIE
HRISTIE
NCORPORATED
NCORPORATED
1 0 5 5 0 C a m d e n D r i v e
C y p r e s s , C A 9 0 6 3 0
714-236-8610
Fax: 714-229-3185

Advertisement

Table of Contents
loading

Related Manuals for Christie P35GPSZ-MT

Summary of Contents for Christie P35GPSZ-MT

  • Page 1: Operating Instructions

    CHRISTIE I N C O R P O R A T E D Operating Instructions 35mm Film Projector Manual Turret Model P35GPS(Z)-MT Automatic Turret Model P35GPS(Z)-AT Automatic Turret Model M35GPS(Z)-AT 115VAC, 60Hz Motor or 220VAC, 50Hz Motor TD-621: Version 3.5...
  • Page 2 HRISTIE NCORPORATED All other copyrights and trademarks are the property of their respective owners. CHRISTIE I N C O R P O R A T E D I N C O R P O R A T E D I N C O R P O R A T E D...

  • Page 3: Table Of Contents

    Installation......................4-2 4.3. Film Threading and Operating Procedure..............4-2 MAINTENANCE .................. 5-1 5.1. General Maintenance .....................5-1 5.2. Visual Inspection......................5-1 5.3. Cleaning .........................5-2 5.4. Removal of Assemblies ....................5-2 5.4.1. Removal of the Trap and Gate Assembly ...............5-2 CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 4 ............7-1 7.1. Motor ..........................7-1 7.1.1. SYMPTOM: Motor Not Working................. 7-1 7.2. Ultramittent Assembly....................7-2 7.2.1. SYMPTOM: Excessive Ticking................7-2 7.2.2. SYMPTOM: Excessive Film Noise ..............7-2 7.2.3. SYMPTOM: Film Instability (Jump) ..............7-2 CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 5 SYMPTOM: Sprocket Riding ................7-2 7.4. Belts ..........................7-3 7.4.1. SYMPTOM: Excessive Noise ................7-3 7.4.2. SYMPTOM: Excessive Belt Dust .................7-3 7.4.3. SYMPTOM: Excessive Belt Failure..............7-3 7.5. Changeover Assembly....................7-3 7.5.1. SYMPTOM: Operating Inconsistently ..............7-3 7.5.2. SYMPTOM: Not Operating...................7-3 CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 6 Analog Central Pivot Soundhead Assembly............... B-20 B-14: Digital Central Pivot Soundhead Assembly ............... B-22 B-15: Intermittent Shoe Closure Assembly ................B-25 Appendix C: Diagrams and Parts Lists M35GPS........ C-1 Appendix D: Schematic Diagrams............D-1 Index ...................... D-3 CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 7: Table Of Contents

    194895-001)......B-18 Table B-10: 30-Groove Non-Flanged Idler Assembly Parts List ..........B-18 Figure B-11: Outer Timing Belt Tensioner Assembly (P/N 196055-001) ....... B-19 Table B-11: Outer Timing Belt Tensioner Assembly Parts List ..........B-19 CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 8 Central Pivot Analog Soundhead Assembly Parts List........B-22 Figure B-15: Intermittent Shoe Closure Assembly (P/N 120651M001)........B-25 Table B-15: Intermittent Shoe Closure Assembly Parts List ........... B-26 Table C- 1: Schematic Diagrams for P35GPS Projector ............C-1 CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 9: 1 . I N T R O D U C T I O N

    Troubleshooting Procedures. Additional reference information is contained in the appendices. 1.3. P E C I AL O TI C E S Three kinds of specific notices are used within this manual to emphasize specific information. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 10: Warning

    A U T I O N CAUTION: Indicates the presence of a hazard that could cause damage to projection system. 1 . 3 . 3 . N O T E NOTE: Provides additional information. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 11: General Description

    G E N E R AL D E S C R I P T I O N The CHRISTIE P35GPS Projector, manufactured exclusively by CHRISTIE INCORPORATED in Cypress, California, is a dual-lens 35mm movie projector that employs a revolutionary sealed-bearing intermittent movement called the Ultramittent©.
  • Page 12 Trap and Gate Assembly (194615M001) 14. Soundhead Access Door (19041-001) Aperture Plate (121117-00X) 15. ‡ Light Shield (194434-00X) Intermittent Shoe Closure (120651M001) ‡ Analog or Digital * Manual or Motorized Figure 2-2: Projector, Front View CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 13 33: Inner Timing Belt (598931-179) 10: Sounddrum Shaft (196315-001) 34: TB1 Connector (586210-602) 24: Digital LED Supply (194834-001) 35: Outer Timing Belt (598931-528) 25: Turret Control Module (121428-001) 36: Sounddrum Flywheel (119166-001) Figure 2-3: Projector, Rear View CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 15: Projector Installation And Assembly

    The CHRISTIE P35GPS projector may be shipped in more than one container. Each P35GPS projector normally comes complete with the following items: • dual aperture plate (shipped in place) •...
  • Page 16 Insert into two bottom mounting holes on projector. 4. Level projector on lamphouse or pedestal. 5. Tighten nut on mounting stud using 9/16" wrench. 6. Tighten three hex head screws using same wrench. Figure 3-1: Installing the Projector CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 17: Solar Cell Wiring

    (-), green – right (+), white – right (-)). The best signal-to-noise ratio is achieved by maintaining the same ground potential between the soundhead and the cinema processor. Refer to the directions in the sound system instruction manual for proper connection of the sound system. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 18 A-C wiring to the projector requires stranded, 14-gauge wire. Be sure to follow all local and national electrical codes for A-C wiring. The terminal connection numbers in the table in Figure 3-4 refer to terminals TB-1 in Figure 3-3. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 19 Framing lamp, cooling fan, and changeover (A-C neutral). Figure 3-4: Table of A-C Terminal Connections The voltage and frequency rating of the projector (shown on the nameplate) must match the power line frequency and voltage being used. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 21: Operating The Projector

    1. Secure turret hinge plate with four Allen head screws. 2. Install turret latch assembly using same holes and hardware (if it is not already installed). 3. Connect turret wiring to TB4-1 (Red) and TB4-2 (Black). CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 22: Lens Installation

    Holding two lateral guide rollers (H and K) towards each other, pull film tight and align film on lower constant-speed sprocket assembly (M). b) Tighten film on one sprocket hole so lateral guides barely float off sound drum. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 23 F: Center constant-speed sprocket pad roller Q: Airpot G: Center constant-speed sprocket assembly R: Open center constant-speed sprocket pad roller H: Lateral guide roller S: Aperture linkage J: Soundhead Assembly T: Gate bands Figure 4-1: Threading Diagram CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 24 • • • • Framing lamp is functional with picture changeover in either position. • • • • If film reel is used, be sure take-up tension is in accordance with reel manufacturer’s instructions. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 25: Maintenance

    Ultramittent should be visually checked every 30 days. If leak is CHRISTIE CHRISTIE CHRISTIE CHRISTIE detected, contact to arrange for loan of substitute Ultramittent. If leak is very slow, you may continue to operate Ultramittent for 30 to 90 days. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 26: Cleaning

    1. Open trap and gate assembly by pulling catch knob (item 56 in Figure B-2). 2. Remove two socket head cap screws (items 39 in Figure B-2) securing assembly to main frame. 3. Remove assembly by gently pulling free from locating pins. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 27: Outer Timing Belt

    Refer to Figure 5-3 below. 1. Remove outer timing belt (see Section 5.4.2). 2. Loosen adjustable inner idler pulley screw (item 1 in Figure 5-3). 3. Remove inner timing belt (item 10 in Figure 5-3). CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 28: Shutter Timing Belt

    1. Loosen three Allen head screws securing jackshaft assembly to mainframe (item 5 in Figure 5-4). 2. Pull jackshaft assembly down approximately 0.5 inch. 3. Remove shutter timing belt (item 1 in Figure 5-4). CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 29 (lower sprocket assembly only). b) Remove turn-down knob (lower sprocket assembly only). c) Remove three Allen head screws from operating side of mainframe. d) Carefully slide sprocket assembly out of non-operating side of mainframe. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 30: Removal Of Fan

    S S E M B L Y Refer to item 12 in Figure 5-3 on page 5-4. 1. Carefully pull four quick connect lugs from electric changeover assembly. 2. Loosen Allen screw on douser hub, which clamps onto flex shaft. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 31 R A M I N G A M P 1. Open framing lamp door, which is secured by two quarter-turn fasteners (item 13 in Figure 2-2 on page 2-2. 2. Remove lamp as with ordinary light bulb. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 33: Calibration, Alignment, And Adjustment Procedures

    1: Vertical alignment set screw 2: Vertical alignment adjustment 3: Horizontal alignment set screw 4: Horizontal alignment adjustment 5: Focus adjustment 6: Azimuth alignment set screw 7: Azimuth adjustment Figure 6-1: LED Soundhead Assembly CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 34: Preliminary Procedures

    5. Carefully lock focus adjustment (5) and azimuth set screw (6). 6. Turn cinema processor's pre-amplifier Hf adjustments clockwise until real-time analyzer shows flat frequency response to 16 kHz. 7. Verify that both channels have identical frequency response. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 35: Alignment Verification

    T E P S 1. Turn LED power supply down (CCW) to minimum. 2. Connect video cable to CCD assembly. 3. Turn on digital processor. 4. Apply AC power to projector and verify that LEDs are operational. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 36 7. Adjust lateral positioning (item 6 in Figure 6-2) to center image on CCD. It should read zero ±0.5 mils on DRAS or QC software. 8. Magnification should be 100 ±2%; adjust focal distance if necessary. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 37 Figure 5-4). 2. Pull adjust plate (item 5 in Figure 5-4) up until belt deflection is 0.25 inch. It should be just possible to touch belt together at its midpoint. 3. Tighten screws firmly. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 38: Shutter Timing

    5-4). Do not allow shutter to move on its shaft after centering crosshairs. 7. Recheck shutter timing. CHRISTIE CHRISTIE CHRISTIE CHRISTIE recommends that shutter timing also be checked whenever inner, outer, or shutter timing belts have been removed or replaced. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 39 A momentary connection between the terminals of TB4-5 will COMMON FLAT move the turret to the lens position. FLAT 1: Jack Screw 2: Clamping Screws 3: Drive Pulley 4: Drive O-Rings Figure 6-3: Dual Turret (Front View) CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 40 8: Cover, Motor 9: Eccentric, Adjustment and Lock 10: Adjustment, V-bearing 11: Knob, Focus 12: Cover Plate, Turret 13: Turret Main Plate 14: Adjustment, Flat Stop 15: Adjustment, Scope Stop Figure 6-4: Dual Turret (Rear View) CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 41: Optical Image Alignment And Adjustment Procedures

    SCOPE FLAT 9. Center RP-40 image vertically, using stop adjustment, and laterally, using eccentric adjustment, to match image settings. SCOPE 10. Set focus knobs to the middle of travel range. 11. File aperture plates. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 43: Troubleshooting Procedures

    1. Check power to motor. Verify that projector is plugged in, and that manual switch is set 2. Check start capacitor. 3. Check for motor overheating/thermal shutdown. If motor is hot, wait until it has cooled off before attempting to restart. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 44: Ultramittent Assembly

    7 . 3 . 3 . S Y M P T O M : S P R O C K E T I D I N G 1. Check alignment of pad roller. Adjust as needed. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 45: Shutter Drive (Shutter Driver And Jackshaft System)

    7 . 6 . 1 . S Y M P T O M : E X C E S S I V E O I S E Remove shutter belt. Localize noise to driver or jackshaft. 1. Check rotation of bearings on shafts. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 46: Symptom: Shutter Streak

    N O P E R A T I V E 1. Lens clamping screws too tight. Adjust as necessary. 2. Focus adjustment threaded out of range. 3. Bushing are binding on lens barrel shafts. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 47: Symptom: Turret Hinge Too Loose

    7 . 8 . 4 . S Y M P T O M : T U R R E T I N G E I G H T Adjust bushing at base of hinge. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 49 Digital Power Supply Assembly 194852-001 LED Soundhead Assembly 5.4.7 194856-001 Upper Constant-Speed Sprocket Assembly 5.4.5 194856-002 Center Constant-Speed Sprocket Assembly 5.4.5 194857-001 Lower Constant-Speed Sprocket Assembly 5.4.5 Table A-1: P35GPS Projector Replaceable Assemblies and Components CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 50 5.4.3 598931-215 Framing Lamp 5.4.13 598931-277 Rubies for Lateral Guides 598931-528 Outer Timing Belt (two-sided) 5.4.2 598931-533 Shutter Timing Belt 5.4.4 598931-704 Visible Red LED Table A-1: P35GPS Projector Replaceable Assemblies and Components (Continued) CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 51 Lower Constant-Speed Sprocket Assembly Shutter Driver Assembly 30-Groove Flanged Idler Assembly 30-Groove Non-Flanged Idler Assembly Outer Timing Belt Tensioner Assembly Inner Timing Belt Tensioner Assembly Central Pivot Analog Soundhead Assembly Central Pivot Digital Soundhead Assembly. CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 52: B-1: Changeover Douser Assembly

    S S E M B L Y Figure B-1: Changeover Douser Assembly (P/N 121195-001) Item Description Part Number Mounting Plate, Solenoid 121196P001 Solenoid, Modified 121205-001 PCB Changeover Filter Assembly 196117-001 Block, Friction 121199-001 Plunger, Solenoid 121202-001 Cable, Flexible Shaft 121203-001 CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 53 Screw, Set 6-32 X .110 In (0.2794 Cm) L 121206-001 Plate, Clamp 121200-001 Tube , Change-Over Assembly 121201-001 Loctite 290 598931-415 Screw, Set 8-32 x 0.375 in (0.9525cm) L 598931-414 Table B-1: Changeover Douser Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 54: B-2: Automatic Curved Trap And Gate Assembly

    P 3 5 G P S D u a l L e n s T u r r e t P r o j e c t o r B-2: U TO M ATI C U R V E D R AP AN D S S E M B L Y Figure B-2: Automatic Curved Trap and Gate Assembly (P/N 194615-001) CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 55 Pin, Dowel, 0.125 in (0.3175 cm) DIA x 0.25 in (0.635 598931-404 cm) L (2) Screw, SHC, 4-40 UNC x 0.5 in (1.27 cm) L (2) 598931-405 Guide, Film Threading 121228-001 Shaft, Gate 120666-001 CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 56 Bushing, Thread Catch 120665-001 Knob, Catch 120669-001 Screw, Button Head , 6-32 UNC x 0.25 in (0.635 cm) L 598931-278 Pin, Dowel, 0.125 in (0.3175 cm) DIA x 0.375 in (0.9525 598931-016 cm) L (2) CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 57 Screw, Set, 8-32 UNC 0.1875 in (0.47625 cm) L 598931-023 Spring, Band Tensioning 120679-001 Pin,-Spring, 0.0625 in (15875 cm) DIA x 0.375 in 515380-041 (0.9525 cm) L (2) Table B-2: Parts List for Automatic Curved Trap and Gate Assembly (Continued) CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 58: B-3: Fixed Idler Assembly

    Item Description Part Number Standoff 194740-001 Roller, Isolator 121120-001 Idler, 30-Groove 194895-001 Retainer, Bearing 119061P002 Screw, Flat Head Socket, ¼-20 x 1.0 in (2.54 cm) L 598931-256 Table B-3: Fixed Idler Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 59: B-4: Fixed Idler Assembly, Flanged

    Part Number Standoff 194740-002 Roller, Isolator 121120-001 Idler, 30-Groove Flanged 194880-001 Retainer, Bearing 119061P002 Screw, Flat Head Socket, ¼-20 x 1.0 in (2.54 cm) L 598931-256 Table B-4: Fixed Idler Roller Assembly, Flanged, Parts List CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 60: B-5: Jackshaft Assembly

    Ball Bearing, 0.375 in (0.9525 cm) ID x 0.875 in 598931-607 (2.2225 cm) OD x 0.2812 in (0.714248 cm) THK Jackshaft 194809-001 Tolerance Ring AN 087037-S 598931-599 Spacer, Jackshaft Housing 194806-002 Table B-5: Jackshaft Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-10 June, 1998...

  • Page 61: B-6: Center And Upper Constant-Speed Sprocket Assembly

    O N S TAN T P E E D P R O C K E T S S E M B L Y Figure B-6: Center and Upper Constant-Speed Sprocket Assembly (P/N 194856-001) CHRISTIE INCORPORATED P35GPS Projector B-11 June, 1998...
  • Page 62 Stop, Pad Roller Arm 119054-001 Insert, Locking Screw 598931-194 Washer, Lock, #4 598931-209 Washer, Plated Flat, #4, Constant Speed 598931-427 Washer, Wave 598931-192 Table B-6: Center and Upper Constant-Speed Sprocket Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-12 June, 1998...

  • Page 63: B-7: Lower Constant-Speed Sprocket Assembly

    O W E R O N S TAN T P E E D P R O C K E T S S E M B L Y Figure B-7: Lower Constant-Speed Sprocket Assembly (P/N 194857-001) CHRISTIE INCORPORATED P35GPS Projector B-13 June, 1998...
  • Page 64 Screw, SHC, 10-32 x 0.625 in (1.5875 cm) L 598931-049 Washer, Wave (2) 598931-192 Pulley, Lower 119111-001 Knob, Turndown 194510-001 Screw, Head, 100°, 10-32 x 0.75 in (1.905 cm) L (2) Shim Spacer 598931-066 CHRISTIE INCORPORATED P35GPS Projector B-14 June, 1998...
  • Page 65 A p p e n d i x B B-8: S H U TTE R R I V E R S S E M B L Y Figure B-8: Shutter Driver Assembly (P/N 194866-001) CHRISTIE INCORPORATED P35GPS Projector B-15 June, 1998...
  • Page 66 Pin, Dowel, 0.125 in (0.3175 cm) DIA x 0.375 in 598931-016 (0.9525 cm) L (2) Screw, Set, Hex Socket Cup, 0.1875 in (0.47625 cm) x 0.125 in (0.3175 cm) Table B-8: Shutter Driver Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-16 June, 1998...
  • Page 67 Tolerance Ring, AN 112031-S 598931-593 Ball Bearing, 0.5 in (1.27 cm) ID x 1.125 in (2.8575 598931-608 cm) OD x 0.3125 in (0.79375 cm) THK Table B-9: 30-Groove Flanged Idler Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-17 June, 1998...
  • Page 68 Tolerance Ring, AN 112031-S 598931-593 Ball Bearing, 0.5 in (1.27 cm) ID x 1.125 in (2.8575 598931-608 cm) OD x 0.3125 in (0.79375 cm) THK Table B-10: 30-Groove Non-Flanged Idler Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-18 June, 1998...
  • Page 69 121120-001 Roller, Non-Flanged Idler 194895-001 119150-001 Washer, Split, 0.25 in (0.635 cm) ID 598931-086 Screw, SHC, ¼-20 x 1.0 in (2.54 cm) L 515500-105 Table B-11: Outer Timing Belt Tensioner Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-19 June, 1998...
  • Page 70 121120-001 Roller, Non-Flanged Idler 194782-001 119150-001 Washer, Split, 0.25 in (0.635 cm) ID 598931-086 Screw, SHC, ¼-20 x 1.0 in (2.54 cm) L 515500-105 Table B-22: Inner Timing Belt Tensioner Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-20 June, 1998...
  • Page 71 Spring Retainer, Sound Drum 119169-001 Compression Spring 598931-140 Ball Bearing, Flanged for Sound Head 598931-122 Bearing Housing 119158-001 Base Plate, Sound Head 196209-001 Dowel Pin 1/8Dia x 1/2 598931-017 Screw, SCH 8-32 x 5/8 598931-045 CHRISTIE INCORPORATED P35GPS Projector B-21 June, 1998...
  • Page 72 Spring Anchor 196205-001 Shim Spacer, .010 THK. (Optional) 598931-063 Analog Reader Assy. 196179-002 Screw, Hex Head 8-32 x 5/8” Screw, Hex Head 8-32 x ½” Table B-13: Central Pivot Analog Soundhead Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-22 June, 1998...
  • Page 73 Figure B-14: Central Pivot Digital Soundhead Assembly (196220-002) Item Description Part Number E Ring 598931-156 Spring Retainer, Sound Drum 119169-001 Compression Spring 598931-140 Ball Bearing, Flanged for Sound Head 598931-122 Bearing Housing 119158-001 Base Plate, Sound Head 196209-001 CHRISTIE INCORPORATED P35GPS Projector B-23 June, 1998...
  • Page 74 LED, Visible Red 598931-704 Spacer, Bearing, Analog / Digital 196210-001 Spring Anchor 196205-001 Upper Arm, Block – Stabilizer 196183-001 Digital Reader Assembly 196182-001 Analog Reader Assembly 196179-002 Clamp Mount Analog / Digital Sound Head 196192-001 CHRISTIE INCORPORATED P35GPS Projector B-24 June, 1998...
  • Page 75 (Not Shown) 194834-001 LED Power Supply Assembly (Not Shown) 194908-001 Shim Spacer .010 THK. (Optional) (Not Shown) 598931-063 O-ring, 1 ½” ID x 1/16” 598931-097 Table B-14: Central Pivot Digital Soundhead Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-25 June, 1998...
  • Page 76 Extension Arm, Film Guide Shoe Closer 120557-001 Flat Washer #6 598931-068 Washer, Split #6 598931-083 Screw, SHC, 6-32 UNC x 0.875 in (2.2225 cm) L 598931-043 Screw, SHC, 8-32 UNC x 0.375 in (0.9525 cm) L (2) 598931-409 CHRISTIE INCORPORATED P35GPS Projector B-26 June, 1998...
  • Page 77 Screw, Set, Hex, 10-32 UNC x 0.25 in (.635 cm) L (2) 598931-025 Spring Compression, Extension Arm 598931-621 Screw, Set, Hex 10-32 UNC x 0.1875 in (0.4763 cm) L 598931-299 Loctite 271 598931-412 Table B-15: Intermittent Shoe Closure Assembly Parts List CHRISTIE INCORPORATED P35GPS Projector B-27 June, 1998...
  • Page 79 Appendix AP P E N D I X C : M 3 5 G P S P R O J E C T O R Figure C-17: M35GPS Projector CHRISTIE INCORPORATED M35GPS Projector June,...

  • Page 80: M35Gps

    Lower Sprocket Assembly 194913-003 Spacer, Sprocket To Bearing 194981-001 Shaft, Pad Roller Arm 194982-001 Pad Roller Shaft 598931-116 Spring Compr. Flat Wire 515610-024 Bowed. Ext. Retaining Ring 515610-020 Ultramittent Assembly 119450-005 Table C-17: M35GPS Projector CHRISTIE INCORPORATED M35GPS Projector June, 1998...
  • Page 81 A p p e n d i x C Figure C-18: Universal Turret Assembly (194916-001) CHRISTIE INCORPORATED M35GPS Projector June, 1998...
  • Page 82 Scope & Flat Lens Clamping Screws And Chain Tension 598931-002 Adjusting Screws Side To Side Scope Screws HS16009 Chain, (Link) 598931-682 Sleeve, (Tubing) 194021-002 Drive Clutch 194957-001 Table C-18: Universal Turret Assembly Parts List CHRISTIE INCORPORATED M35GPS Projector June, 1998...
  • Page 83 Figure C-19: M35GPS Trap and Gate Assembly Item Description Part Number Aperture Plate, Standard 194936-001 Band, Trap 196015P001 Band, Gate 196006P001 Cover, Motor 196028-001 Lateral Guide Roller 598931-257 Trap, Locking Screw 194998P001 Trap Band Tensioning Eccentric 196021P001 CHRISTIE INCORPORATED M35GPS Projector June, 1998...
  • Page 84 Wave Washer .403 ID X .510 OD X .007 (2) 598931-858 Spacer, Shim 3/8 X ½ X .010 HZ00156 Screw Socket Head Cap 10-32 X 5/8 (1.587CM) L 598931-049 Spherical Jewels (2) 598931-277 Table C-19: M35GPS Trap and Gate Assembly Parts List CHRISTIE INCORPORATED M35GPS Projector June, 1998...

  • Page 85: Appendix D: Schematic Diagrams

    Part Number Soundhead wiring diagram 194886 Projector wiring 60Hz 503226 Projector wiring 50Hz 503333 Table D- 1: Schematic Diagrams for P35GPS Projector The schematics are oversize, and are found at the back of the manual. CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 90 P 3 5 G P S D u a l L e n s T u r r e t P r o j e c t o r CHRISTIE INCORPORATED P35GPS Projector June, 1998...

  • Page 91: Index

    Constant-Speed Sprocket Assembly, Lower 4-2, 4-3 Pulley Constant-Speed Sprocket Assembly, Upper 4-2, 4-3 Pulley D D D D Digital Soundhead Assembly Removal Dual Lens Turret Installation Dual-Lens Turret E E E E Electric Changeover Assembly CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 92 Lateral Guide Rollers Solar Cell Wiring LED Soundhead Assembly Soundhead Assembly 3-1, 4-2, 4-3. See Alignment Soundhead Flywheel Removal Lens Installation Maintenance Cleaning Frequency Visual Inspection Manual Turn-Down Knob 4-3, 5-5 Motor Assembly Removal Motor Pulley CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 93 A p p e n d i x D T T T T Removal Trap and Gate Assembly 4-3, 4-4 V V V V Removal Visual Inspection U U U U Ultramittent 2-1, 4-2, 4-3, 4-4 Ultramittent Assembly CHRISTIE INCORPORATED P35GPS Projector June, 1998...
  • Page 94 "Christie") (herein referred to as Christie warrants the apparatus sold to the extent of the parts necessary to correct any defect in workmanship or materials which may develop under proper and normal use for a period of one (1) full year (90 days on electric motors) from the date of installation (except as noted below) but not to exceed eighteen (18) months from the date of shipment from Christie Incorporated.

This manual is also suitable for:

P35gpsz-atM35gpsz-atP35gps-mtP35gps-atM35gps-at

Table of Contents