Table of Contents
Advertisement
P 3 5 G P S D u a l L e n s T u r r e t P r o j e c t o r
10. Place film at upper part of Ultramittent in film guide (R).
11. Align film on steel bands of trap and gate assembly (T).
12. Close gate (C) and lock catch knob (D) in place.
13. Form 1.5-inch loop between upper constant-speed sprocket and gate (C), as shown in
Figure
4-1.
14. Align the film on upper constant-speed sprocket (A) and close film shoe (B).
15. To verify that film is correctly aligned on all sprocket rollers, move turn-down knob (N)
clockwise.
• • • • Framing lamp can be turned "on" or "off" with black rocker switch
• • • • Framing lamp is functional with picture changeover in either
• • • • If film reel is used, be sure take-up tension is in accordance with reel
CHRISTIE INCORPORATED P35GPS Projector
June, 1998
located on top of projector.
position.
manufacturer's instructions.
4-4
Advertisement
Table of Contents
