Running Diagnostic Tests - Sun Microsystems Sun Fire V20z User Manual

TABLE 3-3
Module
voltage
voltage
voltage
voltage
voltage
voltage
voltage
voltage
voltage
voltage
voltage
voltage
3.4.5

Running Diagnostic Tests

When running tests, you can choose to execute all tests or specify a specific module
for which to run tests. The following options are available:
Run tests individually or collectively
■
Choose the type (by module or name) of tests to run
■
Determine the sequence in which the tests are run (using scripts)
■
View status messages about the success of the tests
■
You can run these tests on the machine on which you obtained them. You must have
the appropriate permissions to run these commands.
To run the diagnostics tests, type the following command:
# diags run tests option
Sun Fire V40z Diagnostics Modules and Tests (Continued)
Test
limits.VDD_CPU3_CORE_S0
limits.VLDT_CPU0_LDT0
limits.VLDT_CPU0_LDT2
limits.VLDT_CPU1_LDT1
limits.VLDT_G0_LDT1
limits.VLDT_G1_LDT1
limits.VLDT_REG1
limits.VLDT_REG2
limits.VTT_CPU0_DDR_S3
limits.VTT_CPU1_DDR_S3
limits.VTT_CPU2_DDR_S3
limits.VTT_CPU3_DDR_S3
Devices
VDD CPU3 CORE S0
VLDT CPU0 LDT0
VLDT CPU0 LDT2
VLDT CPU1 LDT1
VLDT G0 LDT1
VLDT G1 LDT1
VLDT_REG1
VLDT REG2
VTT CPU0 DDR S3
VTT CPU1 DDR S3
VTT CPU2 DDR S3
VTT CPU3 DDR S3
Chapter 3 Troubleshooting and Diagnostics 3-19