Safety Instructions - Furuno FA-100 Installation Manual

SAFETY INSTRUCTIONS

WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not install the equipment where it
may get wet from rain or water splash.
Water in the equipment can result in fire,
electrical shock or damage the equipment.
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or damage the equipment.
The voltage rating of the equipment appears
on the label above the power connector.
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
compass
FA-100
1.0 m
CB-100
0.6 m
GVA-100
0.3 m
DB-1
0.3 m
PR-240-CE
0.9m
Attach securely protection
earth to the ship's body.
The protection earth is required
to the power supply to prevent
electrical shock
Steering
compass
0.6 m
0.4 m
0.3 m
0.3 m
0.6 m
i