Furuno FA-100 Installation Manual page 70

AP6.3.3 Displaying AIS target
1. Press [CHART DISPLAY] on FEA-2105. The following "Chart display" window
appears. If not, move the pointer onto the "Tracking" and press [SELECT].
Chart display
Chart Standerd
Tracking
Past tracks
Off Std Other
Length 20 min
Length 20 min
Off Std Other
Show Not older than 3 month
Max. count 200
Ship true symbol scale
2. Set "AIS target" and "AIS target names" lines, Max. count and Max. range.
AIS target
Move the pointer onto "Std" on AIS target line and press [SELECT] to turn on
AIS target display.
- Off : AIS target display is off
- Std : AIS target display is on
- Other: AIS target is on until [STANDARD] is pressed. when [STANDARD]
is pressed, AIS target is off.
AIS target name
Move the pointer onto "Std" on AIS target names line and press [SELECT] to
turn on AIS target name.
- Off : AIS target has no ship's name.
- Std : AIS target has ship's name.
- Other : AIS target has ship's name until [STANDARD] is pressed. When
[STANDARD] is pressed, ship's name disappears.
Other
Mariner Route
Ship System
Ship Primary
Ship Secndery
Labels 5 min
ARPA target
Labels 5 min
Predictor ship 30 sec
User Events
Automatic Events
Positions
Radar Overlay
ARPA target
AIS targets
AIS target names
Max. range 48 nm
1:50000
AP6-12
AP6.3 Setting