Dn-200 Menus; Main Menu Options - Datavideo DN-200 Instruction Manual

DN-200 Menus

The DN-200 is a menu driven unit; there are several menus which are used to set up the unit. The
menu settings are non-volatile (settings are stored even when the unit is switched off). So general
settings, such as date and file type, may only need to be set once. We will look at specific set ups in
more detail later on in this manual, but here is an overview of the available menu options.
Pressing the Navigation Button labelled NEXT will display the next menu option. If all menu options
have been displayed and next is selected then the unit loops back to the first menu option once more.
Pressing the Navigation Button labelled ENTER will select the displayed menu option. The next level
of menu options or a specific setting choice will then be displayed. Pressing the MENU Button will
allow exit of the current menu or setting.
Example menu selection:
menu = exit
MAKE MEDIA FILES
ENTER NEXT

Main Menu Options

There are 8 initial main menu level options and they are:
Menu Option
MAKE MEDIA FILES
EMPTY THIS BIN
SELECT SOURCE
EMPTY ALL BINS
RECORD SETUP
PLAY SETUP
SYSTEM SETUP
FIRMWARE REVISION
menu = exit
EMPTY THIS BIN ?
ENTER
Prepares the content to be seen by the computer in the AVHDD mode.
The operating system environment needs to be previously set to either
FAT32 or NTFS. This action is taken once before connecting to a
computer in AVHDD mode and is done for all the recorded content.
Empties or erases the content within the selected bin, this action cannot
be undone once selected.
The signal to be recorded can be chosen to come either from the IEEE-
1394 input (DIG) as a digital signal or come from the BNC and RCA inputs
as NTSC or PAL analogue signals (ANA).
Empties or erases the content in ALL of the bins. This action cannot be
undone once selected.
Enters the Record Setup Menu group detailed on page 10
Enters the Play Setup Menu group detailed on page 10
Enters the System Setup Menu group detailed on page 11
Displays the current firmware revision for the DN-200
menu = exit
SELECT SOURCE
NEXT ENTER
menu = exit
SELECT SOURCE
ANA
Action taken
9
NEXT
DIG*
Table 1 Main Menu