Logo 1, Logo 2, Clock And Timer - Datavideo HS-2800 Quick Start Manual

LOGO 1, LOGO 2, CLOCK and TIMER

The SE-2800 has the ability to store six static logos and one dynamic logo. The
logo files are transferred to the SE-2800 from a Windows PC using the Ethernet
connection and the supplied SEConfig software.
LOGO 1
The LOGO 1 and LOGO 2 buttons are used to display pre-selected logos on the
SE-2800 Preset and Program outputs. When the button is active the selected
logo is shown. These logos are selected from the switcher's memory and
positioned using a menu option.
LOGO 2 or CLOCK
The user cannot display LOGO 2 and CLOCK at the same time. Instead use
LOGO 1 and CLOCK together or use LOGO 1 and LOGO 2 together.
The clock time can be synchronised with a computer or set manually using a
menu option. The colour and font used in the clock digits can be changed using
the supplied SEConfig software.
TIMER
In some mixing or switching applications it is useful to have a countdown timer. It
could be that the input is a pre-recorded video clip and you need to know when
to be ready to switch away from it.
This countdown timer function is only seen in the status area of the HDMI multi-
view output to the right of the normal Clock function. The timer can be selected
for one input channel, several channels or all channels.
When the TIMER button is active and the user switches to a selected input
channel the countdown starts on the HDMI multi-view.
The value of the countdown, in minutes and seconds (MM:SS), is set by a menu
option. Whilst the countdown is in progress T-Bar operation is ignored.
When the countdown reaches zero the user can then switch or transition to
another input channel. If the countdown reaches zero the switcher will not
automatically change to the selected Preset source.
18