Time Adjustment Settings; Time Adjustment Parameters; To Specify Time Adjustment Settings - Konica Minolta BIZHUB 420 User Manual

Specifying Settings From the Control Panel
3.24

Time Adjustment Settings

The machine's internal clock can be corrected via the network.

Time Adjustment Parameters

The time adjustment parameters are as follows:
Item
NTP Setting
NTP Server Address
Port No.
After specifying this setting, touch [1 System Setting] in the Administrator
Setting, touch [3 Date/Time Setting], and then set the date.
Periodic automatic adjustment is not performed.

To specify time adjustment settings

1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2
In the Network Setting screen, touch [0 Detail Setting].
3
In the Detail Setting screen, touch [2 Time Adjustment Setting].
The Time Adjustment Setting screen appears.
4
Specify the desired settings.
5
Touch [OK].
The device information is set.
bizhub 500/420
Description
Specify whether to turn on the NTP.
Sets the IP address of the NTP server. For details on spec-
ifying the settings, refer to "NTP Server Address" on
page 3-102.
Set the port number used to communicate with the NTP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
3
3-101