Konica Minolta BIZHUB 420 User Manual page 175

3
9
Specify the desired settings.
10
Touch [Fwd.→].
TCP/IP Setting screen 5/5 appears.
11
Specify the desired settings.
12
Touch [OK].
The TCP/IP settings are applied.
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
Reminder
In order to apply the changes made to [TCP/IP Setting] and [IP Address
Setting Method], the machine must be turned off, then on again.
3-50
Specifying Settings From the Control Panel
bizhub 500/420