Konica Minolta BIZHUB 420 User Manual page 353

4
Item
TCP/IP
Network Speed
IP Address Setting Method
IP Address
Subnet Mask
Default Gateway
RAW Port Number 1
RAW Port Number 2
RAW Port Number 3
RAW Port Number 4
RAW Port Number 5
RAW Port Number 6
Dynamic DNS Setting
Host Name
DNS Domain Auto Obtain
DNS Default Domain Name
DNS Search Domain Name1-3
DNS Server Auto Obtain
Primary DNS Server
Secondary DNS Server1-2
SLP
LPD
4-82
Specifying Settings Using PageScope Web Connection
Description
Enables/disables TCP/IP.
Specify the transmission speed.
Select the IP address setting method.
Specify the machine's IP address (syntax: "***.***.***.***"
where the input range for *** is 0 to 255).
Specify the subnet mask of the target network (syntax:
"***.***.***.***" where the input range for *** is 0 to 255).
Specify the default gateway of the target network (syntax:
"***.***.***.***" where the input range for *** is 0 to 255).
Specify the RAW port number (input range: 1 to 65535).
Specify whether to use the dynamic DNS setting.
Enter the host name (up to 63 characters).
Specify whether to enable the automatic acquisition of the
DNS domain name.
Enter the DNS default domain name (up to 254 characters in-
cluding the characters for the host name).
Enter the DNS search domain name (up to 254 characters in-
cluding the characters for the host name).
Specify whether to enable the automatic acquisition of the
DNS server.
Enter the priority DNS server address (syntax: ***.***.***.***
where the input range for *** is 0 to 255).
Enter the substitute DNS server address (syntax: ***.***.***.***
where the input range for *** is 0 to 255).
Enables/disables SLP.
Enables/disables LPD.
bizhub 500/420