Ping Tx Address - Konica Minolta BIZHUB 420 User Manual

Specifying Settings From the Control Panel

PING TX Address

The host address of the device to ping can be specified.
1
In the PING Confirmation screen, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
– To specify the host address with the IP address, touch [IP Address
Input].
– To specify the host address with the host name, touch [Host Name
Input].
– If selecting [Host Name Input], check that the DNS settings are
specified correctly before making the selection. For details, refer to
"TCP/IP Settings" on page 3-46.
3
Enter the host address (IP address or host name (up to 255 charac-
ters)).
– To edit the values that you entered with "IP Address Input", touch
[←] or [→] to move the cursor to the desired area, touch [Delete],
and enter the new value.
– To clear all values, press the [C] (clear) key.
– If the host address exceeds 81 characters, touch [Details] to display
the Host Address Detail screen with the rest of the host addresses.
4
Touch [OK].
The PING TX address is set.
bizhub 500/420
3
3-113