Tcp Socket Setting - Konica Minolta BIZHUB 420 User Manual

4
4.34

TCP Socket Setting

You can specify TCP socket settings.
The settings that can be specified are described below.
Item
TCP Socket
Port No.
Use SSL/TLS
Port No. (SSL/TLS)
TCP Socket(ASCII Mode)
Port No. (ASCII Mode)
Reminder
When changing the TCP socket settings, be sure to turn the power of this
machine off, then on again.
When turning the main power switch to "OFF", then to "ON", wait 10 sec-
onds or more before turning the switch to "ON" again; otherwise, this ma-
chine may not function normally.
The setting of [Use SSL/TLS] and [Port No. (SSL/TLS)] is available only
when the SSL/TLS setting is valid.
Setting the TCP Socket to [OFF] may result in the use of some applica-
tions on the computer unavailable.
4-118
Specifying Settings Using PageScope Web Connection
Description
Specify whether to use a TCP socket.
Enter the port number (input range: 1 to 65535).
Select to use SSL/TLS.
Enter the port number for SSL/TLS (input range: 1 to 65535).
Specify whether to use a TCP socket in the ASCII mode.
Enter the port number (input range: 1 to 65535).
bizhub 500/420