Program Registration - Konica Minolta BIZHUB 420 User Manual

Specifying Settings Using PageScope Web Connection
4.8

Program Registration

Click the Scan tab, and then click "Program".
The information to be entered is as follows:
When "E-mail: Scan" is selected
Item
No.
Name
Select from Address
Book
E-Mail Address
Resolution
File Type
Scan Setting
Subject
Text
Simplex/Duplex
Original Type
Separate Scan
Density
Zoom
Scan Size
File Name
Original Direction
Bind
Special Original
Book Scanning
Booklet Pagination
Erase
Center Erase
Neg-/Positive Reverse
bizhub 500/420
Description
Enter the registration number.
Enter the registration name (up to 24 characters).
Click , and then select the destination from the list to display the
one-touch lists.
Enter the destination e-mail address directly. (up to 320 characters).
Select the resolution.
Select the file format.
Select the unit of the data to be saved.
Specify the subject (Not Specified, 1 to 10). When "Not Specified" was
selected, the default title is used. Click
Specify the text (Not Specified, 1 to 10). When "Not Specified" was
selected, the default text is used. Click
Select "1-Sided", "2-Sided", or "Cover + 2-Sided".
Select the quality of the original such as text or photo.
Enable/disable the "Separate Scan" function.
Adjust the density.
Select the enlargement or reduction ratio for scanning. Select a preset
zoom ratio or specify separate ratios for the X and Y directions.
Select the original size ("Auto", "Standard Size", "Custom Size").
For "Custom Size", specify the horizontal and vertical scanning sizes.
Enter the file name (up to 30 characters).
Select the orientation of the original document.
Select the original binding position.
Select whether the document contains mixed page sizes or is Z-
folded.
Select whether or not to enable book scanning. If "ON" is selected, the
scanning method and binding position are specified.
Select whether or not to enable page scanning. If "ON" is selected, the
binding position is specified.
Specify the width of the perimeter of the document to be erased.
Specify the width of the area along the binding that is to be erased.
Select whether or not the black and white areas of the document are
reversed in the scan.
4
to check the contents.
to check the contents.
4-27