Konica Minolta BIZHUB 420 User Manual page 370

Specifying Settings Using PageScope Web Connection
Note
Be sure to use an authentication method like the one that is used by the
LDAP server. For details, refer to the manual of the LDAP server being
used.
If the authentication method is specified as "GSS-SPNEGO", enter the
domain name for "Active Directory".
Item
No.
LDAP Server Name
Server Address
Port No.
Enable SSL/Port No. (SSL)
Search Base
Timeout
Max Search Results
Authentication Method
Login Name
Password
Domain Name
Select Server Authentication
Method
Use Referral
Initial Setting for Search Details
bizhub 500/420
Description
Displays the LDAP server number.
Enter the LDAP server name.
Enter the LDAP server address (syntax: "***.***.***.***" or
FQDN where the input range of *** is 0 to 255). Symbols "-"
and "." can be used.
Enter the port number used to communicate with the LDAP
server (input range: 1 to 65535).
Specify whether to perform communications with the LDAP
server using SSL/TLS.
Enter the search start point of the LDAP search (up to 255
characters).
Enter the LDAP search timeout (input range: 5 to 300
seconds).
Enter the maximum number of hits to be received as the LDAP
search result (input range: 5 to 1000).
Set the LDAP authentication method.
Enter the login name if authentication is not set to
"anonymous" (up to 255 characters).
Enter the password if authentication is not set to
"anonymous" (up to 128 characters).
Enter the domain name if authentication is set to "GSS-
SPNEGO" (up to 64 characters).
Select the LDAP server authentication method.
Specify whether to use the referral setting. When referral is
used, the search base that was specified in LDAP Sever Set-
ting searches the top and bottom levels as the starting point.
Specify the conditions to perform LDAP detailed searches.
Select OR, AND, Begins With, or Ends With for Name, E-Mail,
Fax Number, Last Name, First Name, City, Company Name,
and Department.
4
4-99