Setting The Save Format Of The Data To Be Scanned; Black Compression Level; To Specify The Compression Level - Konica Minolta BIZHUB 420 User Manual

Specifying Settings From the Control Panel
3.8

Setting the Save Format of the Data to Be Scanned

Black Compression Level

The black compression level can be specified. (Default setting: MMR)
- [MH]: The data size is large.
- [MMR]: The data size is small.

To specify the compression level

1
In the User Setting screen, touch [5 Scanner Setting].
– To display the User Setting screen, refer to page 3-7.
2
Touch [Black Compression Level].
3
Touch the button for the desired setting.
Note
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
When opening the saved data on a computer, MMR-compressed data
may not open depending on the application.
bizhub 500/420
3
3-35